Oce CS7075 User Manual page 169

Description
(HW) Head Warmer
A-HW-[41-56] Printhead [n]
Warmer Too Warm
A-HW-[61-76] Printhead 1 Set-
point Too Warm
W-HW-[1-16] Printhead [n]
Warmer Disconnected
W-HW-[21-36] Printhead [n]
Warmer Wiring
W-HW-[41-56] Printhead [n]
Warmer Too Warm
W-HW-[61-76] Printhead [n]
Setpoint Too Warm
(IS) Ink Sensing
A-IS-[n] [color] Out Of Ink
A-IS-[21-24] [color] Missing Ink
Profiler
A-IS-30 Profiler Setup Error
A-IS-[31-34] Incorrect [color]
Profiler
A-IS-[41-44] Invalid [color] Profiler
Diagnostics
Table B-1. Action and Warning Messages
Cause
The printhead has gotten too
warm.
The printhead setpoint is too high.
The printhead warmer indicated is
disconnected or not functional.
The printhead warmer and ther-
mister may be wired incorrectly.
The printhead has gotten too
warm.
The printhead setpoint is too high.
The off-head ink reservoir indi-
cated is out of ink.
The ink profiler indicated is not
detected.
Ink profilers in wrong positions or
incorrect ink profiler inserted.
The profiler indicated is the wrong
color or the wrong ink type.
The profiler indicated is not valid.
What to do
Contact your Océ Authorized Ser-
vice Provider or Océ Technical Sup-
port.
Contact your Océ Authorized Ser-
vice Provider or Océ Technical Sup-
port.
With the printer power off, ensure
that the head warmer is connected
and restart the printer. If the prob-
lem continues, contact your Océ
Authorized Service Provider or Océ
Technical Support.
Contact your Océ Authorized Ser-
vice Provider or Océ Technical Sup-
port.
Contact your Océ Authorized Ser-
vice Provider or Océ Technical Sup-
port.
Contact your Océ Authorized Ser-
vice Provider or Océ Technical Sup-
port.
Refill off-head ink reservoir.
Ensure that the ink profiler is
installed.
Change profilers to match ink
order or insert correct profiler for
ink type.
Replace the profiler with appropri-
ate profiler.
Replace the profiler with appropri-
ate profiler.
B-9