Oce CS7075 User Manual page 165

Troubleshooting Checklist
Beginning with the #16 printhead, lightly dab the printhead
orifice plate with the moistened cleaning cloth, moving
from the back of the printhead toward the front.
Note Do not wipe the printheads with a horizontal (front to
back) motion of the cloth. Use a vertical dabbing (blot-
ting up and down) motion, working your way across the
printhead surface. The printheads have very small but
very sharp features that can make small tears in the
cloth, creating conditions for fiber particles to enter the
jets and clog. The dabbing motion greatly reduces this
possibility.
4. Repeat for each printhead, turning the cloth regularly and
remoistening with head flush as necessary.
5. When all printheads have been cleaned, return the carriage
to the right side of the printer and reinstall the left-side park-
ing station.
6. Proceed with the remaining daily startup procedures as docu-
mented in this manual.
B-5