Manual Calibrations
The control panel displays a numeric keyboard that you can
use to enter the number of the bad jet.
Fig. 4-6. Numeric entry screen
5. Enter the jet number, then press the Enter key.
6. When you are finished entering jet numbers, press the Esc
key.
The control panel displays the head selection message again.
7. Press and to select the next head number, then press
(Proceed).
8. Repeat steps 5 through 7 for each head containing bad jets
you want to report.
9. When you are finished reporting bad jets, press .
The control panel displays the previous menu.
Clear Individual Bad Jets
When you select Clear Individual Bad Jets, the control panel
displays the following prompt:
Press Proceed to clear a bad jet.
10. Press and to select a head number, then press
(Proceed).
The control panel displays a numeric keyboard that you can
use to enter the number of the bad jet.
1 1. Enter the jet number, then press the Enter key.
Head 1:
4-21