Network Stack Configuration - Dell EMC Edge Gateway 5200 User Manual

Network Stack Configuration

Figure 42. Network Stack Configuration
Table 33. Network Stack Configuration
Parameter
Network Stack
Ipv4 PXE Support
Ipv4 HTTP Support
Ipv6 PXE Support
Ipv6 HTTP Support
IPSEC Certificate
PXE boot wait time
Media detect count
48 BIOS Setup
Settings
Disabled, Enabled
Disabled, Enabled
Disabled, Enabled
Disabled, Enabled
Disabled, Enabled
Disabled, Enabled
0
1
Description
Enable/disable UEFI Network Stack.
Enable/disable IPv4 PXE boot support. If disabled, IPv4 PXE
boot support is not available.
Enable/disable IPv4 HTTP boot support. If disabled, IPv4
HTTP boot support is not available.
Enable/disable IPv6 PXE boot support. If disabled, IPv6 PXE
boot support is not available.
Enable/disable IPv6 HTTP boot support. If disabled, IPv6
HTTP boot support is not available.
Support to enable/disable IPSEC certificate for Ikev.
Wait time in seconds to press ESC key to abort the PXE boot.
Use either +/- or numeric keys to set the value.
Number of times the presence of media will be checked. Use
either +/- or numeric keys to set the value.