Control Command - Icom IC-7600 Instruction Manual

12

CONTROL COMMAND

D Data content description (continued)
• Repeater tone/tone squelch frequency
setting
Command : 1B 00, 1B 01
q*
0
*Not necessary when setting a frequency.
• Memory content setting
Command : 1A 00
q, w Memory channel number
0000–0099 : Memory channel 0 to 99
0100 : Programmed scan edge P1
0101 : Programmed scan edge P2
e Select memory setting
00 : OFF
01 : 1
02 : 2
03 : 3
r–i Operating frequency setting
See "• Operating frequency."
159
w e
0 X X X
q, w e r−i
X X X X X X X X ... X X X X X X X X X X X X X X X X X X
• Band edge frequency setting
Command 02*, 1E 01, 1E 03
q w
X X X X X X X X X X X X 2 D X X X X X X X X X X
X
* Edge number setting is not necessary with com-
mand 02.
o, !0 !1 !2 − !4
o, !0 Operating mode setting
See "• Operating mode."
!1 Data mode setting
1 byte data (XX)
!1
X
!2 – !4 Repeater tone frequency setting
!5 – !7 Tone squelch frequency setting
See "• Repeater tone/tone squelch setting."
!8 – @7 Memory name setting
Up to 10 characters.
See "• Codes for memory name, opening message
and Clock 2 name contents."
e r t y u i
Lower edge
!5 − !7 !8 − @7
X X X X ... X X
X
0: OFF, 1: TONE, 2: TSQL
0: OFF, 1: DATA 1, 2: DATA 2, 3: DATA 3
o !0 !1 !2
Higher edge