Memory Names; D Editing (Programming) Memory Names; Memory Clearing - Icom IC-7600 Instruction Manual

6
MEMORY OPERATION

Memory names

All memory channels (including scan edges) can be
tagged with alphanumeric names of up to 10 charac-
ters each.
Capital letters, small letters, numerals, some symbols
(! # $ % & ¥ ? " ' ` ^ + –
@) and space can be used.

D Editing (programming) memory names

q Push [EXIT/SET] several times to close a multi-
function screen, if necessary.
w Push [MEMORY] (F-4) to select memory list screen.
e Select the desired memory channel with [∫]/[√].
r Push [NAME] (F-4) to edit memory channel name.
• A cursor appears and blinks.
• Memory channel names of blank channels cannot be
edited.
t Input the desired character by rotating the main
dial or by pushing the keypad for number input.
• Push [ABC] or [abc] to toggle capital and small letters.
• Push [123] or [Symbol] to toggle numerals and sym-
bols.
• Push [Ω] (F-1) or [≈] (F-2) for cursor movement.
• Push [DEL] (F-3) to delete the selected character.
• Push [SPACE] (F-4) to input a space.
• Pushing the transceiver's keypad, [0]–[9] and [.] can
also enter numerals.
y Push [EXIT/SET] to input and set the name.
• The cursor disappears.
u Repeat steps e to y to program another memory
channel's name, if desired.
i Push [EXIT/SET] to exit memory list screen.
For your convenience
When a PC keyboard is connected to [USB] (A) con-
nector on the front panel, the memory name can also
be edited from the keyboard.

Memory clearing

Any unused memory channels can be cleared.
The cleared memory channels become blank chan-
nels.
q Select memory mode with [VFO/MEMO].
w Push [MEMORY] (F-4) to select memory list
screen.
e Select the desired memory channel with [∫]/[√].
r Push and hold [CLR] (F-5) for 1 sec. to clear the
contents.
• The programmed frequency, operating mode and filter
disappear.
t To clear other memory channels, repeat steps e
and r.
103
/ . , : ; = < > ( ) [ ] { } ¦ _ –
NAME
123 abc MEMORY
Symbol ABC F-4
F-1 F-2 F-3 F-4
DEL SPACE
F-4 F-5
MEMORY CLR
Beep
(CLR)
F-5
Beep
Beep
Keypad
Main dial
EXIT/SET
VFO/MEMO
Push for 1 sec.