Rit Function; D Rit Monitor Function - Icom IC-7600 Instruction Manual

4
RECEIVE AND TRANSMIT

RIT function

The RIT (Receive Increment Tuning) function com-
pensates for off-frequency operation of the received
station.
The function shifts the receive frequency up to ±9.999
kHz in 1 Hz steps (10 Hz steps when cancelling the 1
Hz step readout) without moving the transmit fre-
quency.
q Push [RIT] to turn the RIT function ON and OFF.
• " " and the shifting frequency appear when the
function is ON.
w Rotate the [RIT/∂TX] control.
• Push and hold [CLEAR] for 1 sec. to reset the RIT fre-
quency.
• Push [CLEAR] momentarily to reset the RIT frequency
when the quick RIT/
• Push and hold [RIT] for 1 sec. to add the shift fre-
quency to the operating frequency.

D RIT monitor function

When the RIT function is ON, pushing and holding
[XFC] allows you to monitor the operating frequency
directly (RIT is temporarily cancelled).
For your convenience— Calculate function
The shift frequency of the RIT function can be added/
subtracted to the displayed frequency.
While displaying the RIT shift frequency, push and
hold [RIT] for 1 sec.
73
∂
TX clear function is ON. (p. 132)
RIT CLEAR
[RIT/∂TX]
RIT shifting frequency
XFC