Memory List Screen; D Selecting A Memory Channel Using The Memory List Screen; D Confirming Programmed Memory Channels - Icom IC-7600 Instruction Manual

Memory list screen

The memory list screen simultaneously shows 7
memory channels and their programmed contents. 13
memory channels can be displayed in the wide mem-
ory list screen.
You can select a desired memory channel from the
memory list screen.

D Selecting a memory channel using the memory list screen

q Push [EXIT/SET] several times to close a multi-
function screen, if necessary.
w Push [MEMORY] (F-4) to select memory list
screen.
• Pushing [WIDE] (F-6) switches the standard and wide
screens.
e While pushing and holding [SET] (F-2), rotate the
main dial to select the desired memory channel.
• [∫] and [√] can also be used.
r Push [EXIT/SET] to exit memory list screen.
D Confirming programmed memory channels
q Select memory list screen as described above.
w While pushing [ROLL] (F-1), rotate the main dial to
scroll the screen.
e Push [SET] (F-2) to select the highlighted memory
channel, if desired.
• "≈" appears beside the selected memory channel num-
ber in the memory list screen and the selected memory
channel contents are displayed below the frequency
readout.
r Push [EXIT/SET] to exit memory list screen.
MEMORY OPERATION
F-2 F-4
SET MEMORY
• Memory list screen
F-1 F-2
ROLL SET
6
WIDE
F-6
Main dial
EXIT/SET
Main dial
EXIT/SET
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
100