Frequency Setting; D Tuning With The Main Dial; D Direct Frequency Entry With The Keypad - Icom IC-7600 Instruction Manual

Frequency setting

The transceiver has several tuning methods for con-
venient frequency tuning.

D Tuning with the main dial

q Push the desired band key on the keypad 1–3
times.
• 3 different frequencies can be selected on each band
with the band key. (See previous page "Using the band
stacking registers.")
w Rotate the main dial to set the desired frequency.
If the dial lock function is activated, the lock indica-
tor lights, and the main dial does not function.
In this case, push and hold [SPEECH/LOCK] for
1 sec. to deactivate the lock function. (p. 82)
When "LOCK/SPEECH" is selected in "[SPEECH/
LOCK] Switch" item in others set mode, pushing
[SPEECH/LOCK] deactivates the lock function.
(see p. 131 for details)

D Direct frequency entry with the keypad

The transceiver has a keypad for direct frequency
entry as described below.
q Push [F-INP ENT].
• " " indicator appears.
w Input the desired frequency.
• Push [GENE •] to input ". (decimal point)" between the
MHz units and kHz units.
e Push [F-INP ENT] to set the input frequency.
• To cancel the input, push [EXIT/SET].
[EXAMPLE]
14.025 MHz
F-INP 1.8 10
4
ENT 1
18.0725 MHz
F-INP 1.8 24
ENT 1 8
706 kHz
F-INP 50 21
7
ENT 0
5.100 MHz
F-INP 14 1.8 F-INP
5
ENT 1
7.000 MHz
F-INP 21 F-INP
ENT 7 ENT
21.280 MHz 21.245 MHz
F-INP 3.5 10
ENT 2 4
BASIC OPERATION
Band keys
Main dial
Keypad
50 3.5 14 F-INP
0 5
2 ENT
50 21 3.5 14 F-INP
0 2 5
7
50 18 F-INP
6
0 ENT
ENT
14 F-INP
5 ENT
3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
ENT
15
16
17
18
19
20
21
28