Icom IC-7600 Instruction Manual page 87

• Scanning during dualwatch
Scanning operates only for the main readout. To
operate the scan during dualwatch, scan on the main
readout and use the sub readout for your QSO using
both dualwatch and split frequency operation.
q Program the desired programmed scan edges in
the same amateur band. See p. 101 for program-
ming.
• If you plan to operate a ∂F scan, programming the
scan edges may not be necessary.
w Push [SPLIT] to turn the split frequency function
ON.
• " " appears.
e Select VFO mode for the main readout.
r Set the desired operating frequency for the main
readout.
t Push and hold [DUALWATCH] for 1 sec.
• " " appears.
• Equalized receive frequency and operating mode
appear on the sub band readout and the dualwatch
function is turned ON.
y Push [SCAN] (F-5) to select the scan screen.
• Push [EXIT/SET] several times to close a multi-func-
tion screen, if necessary.
u Push [PROG] (F-1) or [∂F] (F-2) to start the pro-
grammed scan or ∂F scan, respectively.
• Scan activates on the main readout between the pro-
grammed scan edges or within the ∂F span.
• Transmitting on the sub readout stops the scan.
i To cancel the scan, push [EXIT/SET].
RECEIVE AND TRANSMIT
DUAL
SPLIT
WATCH
F-1 F-2 F-5 EXIT/SET
∂F
PROG SCAN
4
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
80