Memory Operation; Memory Channels; Memory Channel Selection; D Using The [∫]/[√] Keys - Icom IC-7600 Instruction Manual

6

MEMORY OPERATION

Memory channels

The transceiver has 101 memory channels. Memory
mode is very useful for quick change to often-used
frequencies.
MEMORY
CHANNEL
Regular memory
channels
Scan edge
memory
channels

Memory channel selection

D Using the [∫]/[√] keys
q Push [VFO/MEMO] to select memory mode.
w Push [∫]/[√] several times to select the desired
memory channel.
• Push and hold [∫]/[√] for continuous selection.
• [UP] and [DN] on the microphone can also be used.
e To return to VFO mode, push [VFO/MEMO] again.

D Using the keypad

q Push [VFO/MEMO] to select memory mode.
w Push [F-INP ENT].
e Push the desired memory channel number using
the keypad.
• Enter 100 or 101 to select scan edge channel P1 or P2,
respectively.
r Push [∫] or [√] to set the memory channel.
[EXAMPLE]
To select the memory channel 3;
- Push [F-INP ENT], [7 3], then push [∫] or [√].
To select the memory channel 12;
- Push [F-INP ENT], [1.8 1], [3.5 2], then push [∫] or
[√].
To select the scan edge channel P1;
- Push [F-INP ENT], [1.8 1], [50 0], [50 0], then push
[∫] or [√].
To select the scan edge channel P2;
- Push [F-INP ENT], [1.8 1], [50 0], [1.8 1], then push
[∫] or [√].
99
MEMORY
CHANNEL CAPABILITY
NUMBER
One frequency and one mode in each
1–99
memory channel.
One frequency and one mode in each
P1, P2 memory channel as scan edges for
programmed scan.
All 101 memory channels are tunable which means
the programmed frequency can be tuned temporarily
with the main dial, etc. in memory mode.
TRANSFER
TO VFO
Yes
Yes
OVER-
CLEAR
WRITING
Yes Yes
Yes No
VFO/MEMO
Keypad
F-INP
ENT
VFO/MEMO