Volume Setting; Meter Indication Selection; D Multi-Function Digital Meter - Icom IC-7600 Instruction Manual

Volume setting

Rotate [AF] control clockwise to increase, counter-
clockwise to decrease the audio output level.
Decreases

Meter indication selection

The transceiver has 6 transmit meter functions for
your convenience.
Push [METER]
(MF2)
desired meter.
Indicates the RF output power in % (per-
cent).
Indicates the SWR on the transmission
line.
Indicates the ALC level. When the meter
movement shows the input signal level
exceeds the allowable level, the ALC
limits the RF power. In such cases,
reduce the [MIC GAIN] control.
Indicates the compression level when
the speech compressor is in use.
Indicates the drain current of the final
amplifier MOSFETs.
Indicates the drain terminal voltage of
the final amplifier MOSFETs.

D Multi-function digital meter

The IC-7600 can display the multi-function digital
meter on the LCD display. This meter displays all
transmit parameters simultaneously.
q Push and hold [METER] (MF2) for 1 sec. to turn
the multi-function digital meter ON.
w Push [P-HOLD] (F-1) to toggle the peak level hold
function ON.
• " P-HOLD" appears on the window title when the peak
level hold function is ON.
e Push and hold [METER] (MF2) for 1 sec., or push
[EXIT/SET] to turn the multi-function digital meter
OFF.
Increases
several times to select the
BASIC OPERATION
[AF]
METER
Power level readout
ALC level readout
I readout
D
METER F-1 EXIT/SET
P-HOLD
"P-HOLD" indicator
3
SWR readout
Compression level
readout
V readout
D
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
34