Icom IC-7600 Instruction Manual page 136

10
SET MODE
Others set mode (Continued)
Quick SPLIT
When this item is set to ON, pushing and holding
[SPLIT] for 1 sec. sets the unselected VFO's readout
frequency and operating mode to the selected VFO's
readout, and activates split operation. (default: ON)
See p. 89 for details.
FM SPLIT Offset (HF)
Sets the offset (difference between transmit and
receive frequencies) for the quick split function. This
setting is used for HF bands in FM mode only and is
used to input the repeater offset for an HF band.
The offset frequency can be set from –9.999 to
+9.999 MHz in 1 kHz steps. (default: –0.100 MHz)
FM SPLIT Offset (50M)
Sets the offset (difference between transmit and
receive frequencies) for the quick split function. This
setting is used for 50 MHz band FM mode only, and is
used to input the repeater offset for the 50 MHz band.
The offset frequency can be set from –9.999 to
+9.999 MHz in 1 kHz steps. (default: –0.500 MHz)
SPLIT LOCK
When this item is ON, the main dial can be used to
adjust the transmit frequency while pushing [XFC]
even while the lock function is activated.
(default: OFF)
See pgs. 88, 89 for split frequency operation details.
Tuner (Auto Start)
The internal antenna tuner has an automatic start
capability which starts tuning if the SWR is high.
(default: OFF)
Tuner (PTT Start)
Tuning of the internal/external antenna tuner
can be started automatically at the moment the
[PTT] is pushed after the operating frequency is
changed (more than 1% from last-tuned frequency).
(default: OFF)
129
ON
• OFF : Quick split OFF
• ON : Quick split ON
–0.100MHz
–0.500MHz
OFF
• OFF : Split lock OFF
• ON : Split lock ON
OFF
• OFF : The tuner remains OFF even when the
SWR is high.
• ON : Automatic tune starts even when the tuner
is turned OFF during HF bands operation.
OFF
• OFF : Tun ing star ts only when [TUNER] is
pushed.
• ON : (Internal antenna tuner) Tuning starts
when [PTT] is pushed on a new frequency
(more than 1% from last-tuned frequency) if
the internal antenna tuner is ON.
(External antenna tuner) Tuning always
starts when [PTT] is pushed on a new
frequency (more than 1%) regardless of the
external antenna tuner ON/OFF.