Programming A Memory Name - Icom IC-7600 Instruction Manual

5
VOICE RECORDER FUNCTIONS

Programming a memory name

Memory messages can be tagged with alphanumeric
names of up to 30 characters each.
Capital letters, small letters, numerals, some symbols
(! # $ % & ¥ ? " ' ` ^ + –
@) and spaces can be used. (See the table below.)
q Record a message as described in page 94.
w During the voice mic. record screen indication,
push [NAME] (F-5) to enter memory name edit
condition.
• A cursor appears and blinks.
e Push [T1..T4] (F-6) several times to select the
desired voice message.
r Input the desired character by rotating the main
dial or by pushing the band key for number input.
• Push [ABC] (MF6) or [abc] (MF6) to toggle capital and
small letters.
• Push [123] (MF7) or [Symbol] (MF7) to toggle numer-
als and symbols.
• Push [Ω] (F-1) or [≈] (F-2) for cursor movement.
• Push [DEL] (F-3) to delete the selected character.
• Push [SPACE] (F-4) to input a space.
• Pushing the transceiver's keypad, [0]–[9] and [.] can
also enter numerals.
t Push [EXIT/SET] to input and set the name.
• The cursor disappears.
y Repeat steps e to t to program another voice
message's name, if desired.
u Push [EXIT/SET] twice to exit the voice recorder
screen.
• Usable characters
Key selection
For your convenience
When a PC keyboard is connected to [USB] (A) con-
nector on the front panel, the memory name can also
be edited from the keyboard.
95
/ . , : ; = < > ( ) [ ] { } ¦ _ –
Editable characters
A to Z (capital letters)
a to z (small letters)
0 to 9 (numbers)
! # $ % & ¥ ? " ' ` ^ + – /
. , : ; = < > ( ) [ ] { } ¦ _ – @
123 abc NAME
Symbol ABC
F-5
F-1 F-2 F-3 F-4
DEL SPACE
• Voice mic. record screen
Voice memory name editing example
T1..T4
Keypad
F-6
Main dial
EXIT/SET