Table of Contents
Advertisement
Preparing Your Printer
This section explains how to unpack your printer and a set of consumables and paper.
•
Unpacking
•
Installing Consumables
•
Loading Paper
Unpacking
Lift this machine by 2 persons, because it weighs approximately 40 kg.
• Be sure to use the consumables or maintenance units provided with this printer at first. Otherwise, the life of the
consumables or maintenance units may not be displayed correctly, or you may not be able to use them later.
• Use extra care when handling the image drum (the green cylinder), because it is fragile.
• Do not expose the image drum to direct sunlight or strong light (approximately 1,500 lux or more). Even under room
lighting, do not leave the image drum for 5 minutes or more.
• Packaging and cushioning materials are required for transporting the machine. Do not dispose of it, and keep it for
future use.
1
Remove the machine from the box, and then remove all cushioning materials
and the plastic bag from the machine.
2
Remove the two strips of protective tape (Blue) at the back of your printer.
3
Lift the machine, and then place it where it is to be installed.
• If you use optional additional tray units, see "Options" in "Appendix".
- 21 -
Injury may result.
2. Setup
Advertisement
Table of Contents
