Service Manual LWU650-APS LWU530-APS Warning The technical information and parts shown in this manual are not to be used for: the development, design, production, storage or use of nuclear, chemical, biological or missile weapons or other weapons of mass destruction; or military purposes; or purposes that endanger global safety and peace. Moreover, do not sell, give, or export these items, or grant permission for use to parties with such objectives.
Page 3
Do not touch the fan motor while it is rotating. Do not touch the fan motors when you have turned on the projector with the UPPER CASE removed. It may injure you. LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
ü The built-in 16W speaker can deliver sufficient sound volume in a large space like a classroom without external speakers. ü Has an HDCR and an eClarity features which are original image stabilizer for a clearer image. LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
* DC power cannot be provided from these ports. ** Wireless network function requires the optional USB wireless adapter. The communication speed (and standard) is restricted depending on circumstances like encryption, communication mode and so on. LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
(31) (29) RESET button (30) ▲/▼/◄/►cursor buttons (31) Battery cover Back of the remote control NOTE • Any button marked with “*” is not supported on this projector. LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
・ If you observe battery leakage, wipe out the leakage and then replace a battery. If the leakage adheres to your body or clothes, rinse well with water immediately. ・ Obey the local laws on disposing a battery. LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 9
• The projector may display the message such as “CHECK THE AIR FLOW” or turn off the projector, to prevent the internal heat level rising. LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 10
►Do not use cleaners or chemicals other than those specified in this manual. ►Do not polish or wipe with hard objects. NOTICE ►Do not directly touch the lens surface with hands. LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
• There is no above failure of AUTO with video source through VIDEO port. The reason is recognition of input signal’s standard does not need to search the capture range from input signal itself. LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 12
After cleaning or changing 1 time the air filter, please be sure to reset the filter hours. After the remedy, turn the power on. LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 13
In such a case, disconnect the power cord, and wait at least 20 minutes. After the projector has sufficiently cooled down, turn the power on again. LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 14
“Cleaning and replacing the air filter” section of this manual. After you have cleaned or changed the air filter, be sure to reset the filter hours. The button operation is not available. LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 15
"LiveViewer" to use. The number of PC connection Try again after one of session is exceeds the limit (max. 50). disconnected. (finish "LiveViewer" application) (continued on next page) LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 16
It is recommended to refer to the section “Troubleshooting” in the latest version of User’s Manual - Operating Guide, Network Guide and the User’s manual of "LiveViewer" from web site. LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 17
Set IP address and Subnet Mask in the which the projector is NETWORK - WIRED SETUP menu. connected to? Make sure those settings of the projector and PC are correct. LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 18
(within 100m) which using Passcode. use same wireless setting ? Remove the projector and PC from the place and try again. LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
(External air sensor PCB) NOTE: 1) The picture above shows the inside of the projector after the UPPER CASE is removed. 2) Wiring shown in this picture may differ from mass-products. LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 20
Re-connect after disconnecting other projectors. number to a PC within Check the section of Troubleshooting for other Network problems about Update the LiveViewer to the latest version. other problems. LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 21
Are pins (2) Use cross cable. and (3) of the RS-232 cable crossed? Are there signals on each pin Check your PC setup. of the cable? Replace MAIN PCB LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 22
Replace either of the following: [2:4]: Phosphor wheel temperature error sensor and MAIN PCB? Light source unit (PW failure) →If not, replace phosphor wheel temperature sensor. MAIN PCB Completed LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 23
Light source unit Assy Light source unit Assy POWER UNIT CIRCUIT POWER UNIT CIRCUIT Projection lens Assy Projection lens Assy Replace dichroic Assy. Replace dichroic Assy. Dichroic Assy Completed Completed LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 24
Replace FPC connector. The following parts may be failed. Replace them in turn, and check if the problem is solved. Projection lens Assy Dichroic Assy Light source unit Assy Completed LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
FAN 2 ASS’Y Fan 6 PHOSPHOR WHEEL FAN GS02692 (GS01512/MN38882/MN39141) FAN 4 ASS’Y Fan 7 PANEL DUCT FAN B GS02694 (GS02671/MS03177) FAN3 FAN4 FAN6 FAN5 FAN1 FAN2 FAN7 LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 26
LWU650-APS / LWU530-APS 7-2 Block diagram LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
(GS02692) (GS02693) Speaker Fan HP Fan PW Fan POW Intake DESCRIPTION (SPEAKER ASS'Y A9) (HP FAN ASS'Y F2) (PW FAN ASS'Y A9) (POW INTAKE FAN ASS'Y A9) PICTURE LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 31
PARTS No. (EA21421R) (PC08941) (QL58621 ※ 1) Label Laser Connnector CPC06 Knob Shift DESCRIPTION (LASER LABEL F2 CDS (CONNECTOR CPC06) (SHIFT KNOB F2) PICTURE ※ 1 For China models LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 32
(GS02692) (GS02693) Fan POW Intake Speaker Fan HP Fan PW DESCRIPTION (POW INTAKE FAN (SPEAKER ASS'Y A9) (HP FAN ASS'Y F2) (PW FAN ASS'Y A9) ASS'Y A9) PICTURE LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 33
PARTS No. (EA21421R) (PC08941) (QL58621 ※ 1) Label Laser Connnector CPC06 Knob Shift DESCRIPTION (LASER LABEL F2 CDS (CONNECTOR CPC06) (SHIFT KNOB F2) PICTURE ※ 1 For China models LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 34
(SNAP TIE ASS'Y F1) (COTTON STICK L70) PICTURE SYMBOL No. 003-004185-01 PARTS No. (NX32451) ASSY Cotton Stick BB-014 DESCRIPTION (COTTON STICK BB-014) PICTURE ※ 1 For China models LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Soldering iron with temperature control function (temperature range: 320-450˚C) Recommended temperature range per part: Part Soldering iron temperature Mounting (chips) on mounted PCB 320˚C±30˚C Mounting (chips) on empty PCB 380˚C±30˚C Chassis, metallic shield, etc. 420˚C±30˚C LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 36
LCD/LENS prism assembly, replace the whole LCD/LENS prism assembly. CAUTION Make sure not to let a screwdriver or any parts touch LCD panels when you replace a LCD/LENS prism assembly. LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 37
(2) Remove the upper case, according to the disassembling diagram of chapter 9. (3) Detach the PWB assembly MAIN. (4) Remove a whole of optical unit. OPTICAL UNIT DICHROIC OPTICS UNIT LCD Prism Shift mech. assembly LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 38
(2) Screw down the PWB assembly MAIN, and connect all the cables to the PWB assembly MAIN as they were. (3) Re-assemble the set. (4) While re-assembling, please clean the air filter by using a vacuum cleaner. LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 39
• Zytel 101, E. I. du Pont de Nemours & Company (Inc) • Leona 1300S, Asahi Kasei Chemicals Corporation ■ Jig ATTENTION Be sure to use a holder jig at the time of disassembling and assembling. Jig Parts No.:NX38091 LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 40
Screw Name Photo T3x8 Black T3x12 Silver M3x10 Silver M3x8-W Silver M3x8 Silver M3x12-W Silver M4x8-T Silver D-sub Silver T3x10-F Black M3x29-W Silver M3x6-W Silver M3x6 Silver M3x14-W Silver LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 41
If mesh is deformed and floating, assemble UPPER CASE after correcting the deformation. T3x12 Silver M3x6 Silver 0.69 0.88N 0.34 0.05N m Mesh M3x10 Silver 0.34 0.05N m LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 42
LWU650-APS / LWU530-APS Attach it under 6 hooks. LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 43
10. Remove and replace the Main PCB. 11. To reinstall the Main PCB, repeat the above steps in reverse order. (CNGD3) Screw it down together with CNGD1 on HEAT PIPE side. LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 44
LWU650-APS / LWU530-APS ■ Completion of overall wiring of the projector Completion of wiring of the projector is shown below. LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 45
(LD HEAT PIPE FAN 1) EW77 : Connected to E805 : Connected to EW31 : Connected to CNFL1 (R Illuminance sensor) (POWER UNIT CIRCUIT FAN) (External air sensor PCB) LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 46
Do not bend it by applying too much force. Holding the panel flexible cable, pull it out from the connector slowly to the direction indicated by a yellow arrow. Do the same for other 2 cables. LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 47
E803 : Connected to (HEAT PIPE FAN1) HEAT PIPE FAN1 lead Wire CNOPB under HEAT PIPE FAN1 lead, CNFREM, and itself after passing through a clamp, and curl it together with them. LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 48
EW77 : Connected to CNOPR (Illuminance sensor red) Connect R PANEL FAN cable to the connector of the MAIN PCB after wiring it around CNFL1 and CNFL2 clockwise once. LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 49
(in order to put it in the POWER UNIT CIRCUIT side indicated by a yellow arrow). This is to prevent UPPER CASE from pinching CNMPW. POW CABLE BKT LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 50
Attachment of BATTERY PCB and connection to MAIN PCB Wiring of CNBAT(BATTERY PCB cable) MAIN PCB A-side (the side which input port equipped on) EL50 : Connected to CNBAT CNBAT BATTERY PCB LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 51
5. Remove and replace the I/O cover. 6. To reinstall the I/O cover, repeat the above steps in reverse order. Insert X-shaped slit of BLIND SHEET into screws. LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 52
LWU650-APS / LWU530-APS DRIVE PCB ■ Assembling of DRIVE PCB I-O METAL T3x8 Black D-sub Silver M3x8 Silver Tighten screws in order from 1 to 10. LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 53
LWU650-APS / LWU530-APS ■ Attachment of BRIDGE MTL Do not damage DRIVE PCB by cut-out part of BRIDGE MTL. M3x8 Silver Tighten screws in order from 1 to 3. LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 54
Details of attachment of CABLE CLAMP SHEET CABLE CLAMP SHEET T3x10-F Black CABLE CLAMP SHEET Cables T3x10-F Black Pass the slit of CABLE CLAMP SHEET BTM CASE through the rib of BTM CASE. LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 55
Do not pull out CNLPW from CNLDF in the Holder condition of the picture above. FER2 Remove CNLDF from the holder with CNLPW connected. Holding CNLDF, pull out CNLPW after unlocking the lock of a connector. LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 56
Fold back the lead twice according to the length shown above. Wind a tape tightly at the center of folded lead. Use ZTP03 (NITTO tape No.5 W9mm x L30mm). LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 57
4. To reinstall the fan, repeat the above steps Labeled side in reverse order. CAUTION M3x8 Silver M3x8 Silver 0.49 0.1N m F-W DUCT T3x12 Silver Protruding for preventing mis-insertion of FAN LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 58
Curl the cables (second) CNNTL (Laser temperature sensor flexible cable) HEAT SINK FAN2 lead Wire it through the clamp along the red line (side of the case). Clamp LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 59
2. Remove the Main PCB assembly. 3. Remove five screws. 4. Remove and replace the Dichroic assembly. 5. To reinstall the Dichroic assembly, reverse the steps in reverse order. LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 60
・Do not put a heavy load on the conductor. ・Do not touch the glass. ・Do not make electrostatic discharge to the conductor. ・Do not put a heavy load on the glass. LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 61
In assembling the optical engine, make sure to fold and secure the panel flexible cables as well before re-attaching the DICHROIC OPTICS UNIT to the LCD/Lens prism assembly. Fix the three screws with torque (0.6~0.7 N.m) when tightening a screw (Photo A). LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 62
1. Remove the power supply. 2. Remove the two screws. 3. Remove and replace the fan. 4. To reinstall the fan, repeat the above steps in reverse order. LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 63
(large) POW EX DUCT FRONT MESH ASSY T3x12 Silver Mesh Fix Plate FRONT MESH ASSY Reference rib for checking the height Earth terminal M4x8 Silver 0.49 0.1N m LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 64
LWU650-APS / LWU530-APS ■ POW SUB ASSY - 3 Attach POW HLD SU ASSY after inserting the AC inlet connector. POW HLD SU ASSY POW PCB LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 65
Rib of BOTTOM CASE is covered by in-low rib of POW SUB ASSY. BOTTOM CASE Rib of BOTTOM CASE is not covered by in-low rib of POW SUB ASSY. WIRE CLAMP LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 66
Stick red, black, and white tape from the left in order without any gaps as shown in the picture. Adjust the black lead on the left edge to the left edge of the FAN. LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 67
Internal air sensor PCB CNFL2 Internal air sensor cable Attachment of sensor PCB Make sure that 8 hooks are firmly engaged. Completion Attachment of PANEL DUCT UP Cable LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 68
1.2mm or more. Sensor PCB PNL DUCT BTM B AS PCB is higher than the rib. Sensor PCB PCB sticks out, or rotates and sticks out. LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 69
The tapes stuck in advance is indicated by dotted red lines. (In order to avoid the sponge for fixing when the PANEL DUCT UPPER is attached.) B PANEL FAN G PANEL FAN R PANEL FAN LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 70
View of the slits of the PANEL DUCT from above The leads of PANEL FANs viewed from the slits of PANEL DUCT UPPER. Connect them to the connectors of the MAIN PCB with this state. LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 71
Make sure that there is no floating (except at corners)/coming-off/ riding-over/adherence of foreign material after sticking. M3x29-W Silver Be careful not to misassemble. View from Reference Labeled side the bottom for sticking LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 72
Fold back the lead four times according to the length shown above. Wind a tape tightly at the center of folded lead. Use ZTP04 (NITTO tape No.5 W9mm x L30mm). LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 73
CAPA COVER POW PCB POW PCB Make sure to insert hooks of POW SHIELD A and POW SHIELD C into the groove of POW HLD SU ASSY. M3x8 Silver LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 74
Pass AC inlet cable through CABLE FIX SHEET A. CABLE FIX SHEET A POW HLD SU ASSY AC inlet cable M4x8-T Silver Pass through POW HLD SU ASSY. LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 75
■ POW HLD SU ASSY - 3 Make sure to insert hooks of POW SHIELD A and POW SHIELD C into POW HLD SU ASSY. AC inlet CABLE FIX SHEET A LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 76
Close the clamp after passing the POWER UNIT CIRCUIT FAN lead shown above. (its length adjusted in advance) through it. At this stage, the only cable to be attached is CNAC. LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 77
Magnified picture of wiring of POWER UNIT CIRCUIT side. Get the round connector of earth cable touched the detent of fixing metal of POWER UNIT, and screw it down. CNAC LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 78
Screw down the round terminals to the fixing metal together as shown in the picture so that two earth cables will not overlap. CAUTION Screw down CNGD1 and CNGD3 together. LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 79
(3) External air sensor cable (CNFL1) (2) Illuminance sensor(red) cable (CNOPR) (4) Internal air sensor cable (CNFL2) Wire CNOPR and POWER UNIT CIRCUIT FAN cable through this clamp. POWER UNIT CIRCUIT FAN lead LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 80
Make sure that the core is normally locked by visual confirmation. shown in a red circle. Make sure that FER5 does not move to the right and left after fixing them. Completion LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 81
Make sure to lock the core. Pass SK03 and SK04 through the holes (in a dotted red circle) of FER1 and FER2, then fasten SK03, SK04 and the cables together. LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
MENU - RESET. Press the ► or ENTER button to display RESET dialog. b. Next, press the RESET button, then re-press and hold the RESET button for 3 seconds or longer (the FACTORY MENU will appear). LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 83
/255 /255 /255 /255 /255 3. In the same way, use the cells G and B in turn to adjust so that vertical bars are minimized. LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 84
1. Select GAMMA in the FACTORY MENU and press and white balance of 33 steps is best. the RESET button to display the dialog. Select RESET to reset gamma correction. LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 85
● When resetting the values of single tone, place the White balance adjustment. the cursor on the tone to be reset, press the RESET button and select RESET in the dialog. (continued on next page) LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 86
No.2 to 5: ± 40 or less No.6 to 9: ± 50 or less No.10 to 13: ± 70 or less No.14 to 17: ± 120 or less (continued on next page) LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 87
No.11 range of effect No.12 range of effect No.13 range of effect No.14 range of effect No.15 range of effect No.16 range of effect No.17 range of effect LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 88
No.0 is, the better the black solid image becomes. Remember increasing the number lets contrast worse. 5. Set the same value to DICOM No.0, R, G, and B as GAMMA No.0, R, G, and B. LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 89
If any of them are out of the range, re-connect the panel flexible cables to the MAIN PCB. And then, go back to the step 6 to execute the A-GST again. LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 90
When you select Calib and press the → button, another window is displayed as shown above. When you press the → button again and select OK, calibration starts. Calibration finishes in about 30 seconds after it started, and a cursor moves to END. LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
If this is executed, all of the network settings are initialized. SOFT RESET When this is executed, all of the user data is initialized. Never use it if not required. LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 92
0 ..Total usage status 1 ..Current usage status 2 ..Usage status before first reset 3 ..Usage status before second reset 9 ..Usage status before eighth reset LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 93
DATE AND TIME and other schedule settings are not initialized, but the network settings (DHCP, IP ADDRESS, SUBNET MASK and DEFAULT GATEWAY) are initialized. 8. If the network settings had been customized, restore them by manual operation. LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 94
• The SECURITY menu cannot be operated if the SECURITY PASSWORD was released by Life key. • The INSTALLATION is not memorized though they are possible to operate if Transition Detector was released by Life key. LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 95
7. Inactivate the My Screen PASSWORD, Transition Detector and My Text PASSWORD as well. And re-set the Security Password to the factory default number as below. 5714 See the SECURITY menu: User’s Manual - Operating Guide. LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 96
Key lock can be set for either remote control or control panel. Input four buttons to unlock key lock by pressing the buttons on remote control or control panel that is not locked by Key Lock All. LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 97
LWU650-APS / LWU530-APS 11-7 RS-232C communication LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 98
LWU650-APS / LWU530-APS LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 99
LWU650-APS / LWU530-APS LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 100
LWU650-APS / LWU530-APS LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 101
LWU650-APS / LWU530-APS LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 102
LWU650-APS / LWU530-APS LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 103
LWU650-APS / LWU530-APS LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 104
LWU650-APS / LWU530-APS LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 105
LWU650-APS / LWU530-APS LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 106
LWU650-APS / LWU530-APS LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 107
LWU650-APS / LWU530-APS LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 108
LWU650-APS / LWU530-APS LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 109
LWU650-APS / LWU530-APS LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 110
LWU650-APS / LWU530-APS LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 111
LWU650-APS / LWU530-APS (HA03991) CONFIDENTIAL POWER UNIT 1 LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 112
LWU650-APS / LWU530-APS (HA03991) CONFIDENTIAL TRANS POWER UNIT 2 LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 113
LWU650-APS / LWU530-APS (HA04051) CONFIDENTIAL POWER UNIT 3 LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 114
LWU650-APS / LWU530-APS (HA04051) CONFIDENTIAL POWER UNIT 4 LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 115
LWU650-APS / LWU530-APS CONFIDENTIAL PWB assembly SUB 1(REMC) PWB assembly SUB 2(NTC-LD) PWB assembly SUB 3(NTC-PW) PWB assembly SUB 4(BATTERY) LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 116
LWU650-APS / LWU530-APS CONFIDENTIAL PWB assembly SUB 5(SENSOR-B) LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 117
LWU650-APS / LWU530-APS CONFIDENTIAL PWB assembly SUB 6(SENSOR-R) LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 118
LWU650-APS / LWU530-APS CONFIDENTIAL PWB assembly SUB 7(NTC-IN) PWB assembly SUB 8(NTC-OUT) LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 119
EA01 C209 X202 10p-C 24.000MHZ TSX-3225 KIKU3C XOUT WDGRESET AE24 PW_WDGRESET Near GND-4 EW32 GND-2 C210 R261 KIKU4C KIKU4S Near EW34 2.2k-1% 12p-C GND1 PWB assembly MAIN 1 LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 138
4.7k MUTE 22p-C GND1 MUTE Hi : NORMAL Lo : MUTE QA03 2SAR523EBTL A_MUTE GND1 RA19 RESETN 4.7k Hi : NORMAL Lo : MUTE PWB assembly MAIN 20 LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...
Page 144
PWB assembly MAIN 19 PWB assembly MAIN 20 PWB assembly MAIN 21 PWB assembly MAIN 22 PWB assembly MAIN 23 PWB assembly MAIN 24 PWB assembly MAIN 25 LWU650-APS/LWU530-APS 020-001522-01 Rev. 1 (11-2018) Service Manual LIT MAN SERV APS Series...