Edit Text - Christie J Series 2.0 kW Setup Manual

3.2.6 Edit Text

Activate the Edit Window: To enter or edit text, highlight the desired parameter (such as a channel name) and
press E
to activate its adjacent edit window. Any previously entered text is displayed with its first
NTER
character highlighted in a square cursor, signifying that this character is ready for editing.
Navigate Within the Edit Window: Press R
K
to move the cursor backwards as desired.
EY
Edit a Character: To edit a highlighted character, use U
through the available alphabet, numbers, spaces and punctuation. When the character you need appears, press
R A
IGHT RROW
a lower case letter into a capital letter, position the cursor on the letter and press F
A K . To convert a capital letter into a lower case letter, position the cursor on the letter and press F
RROW EY
followed by the D
NOTE: Numbers can also be entered directly from the keypad.
Add or Delete a Character or Space: To insert a space at the cursor location, press F
A K . To delete a highlighted character (or space), press F
RROW EY
Delete All Characters: Press F
Press Enter When Finished: To accept edits and leave the edit window, press E
NOTE: Press E
Edit Numerical Values: Enter numbers directly from the keypad to specify numbers representing projector
channels (source setups), or slots. As each digit is entered, it is inserted on the right of the field, and the
numbers already in the field are shifted on the left. The channel numbers are defined with two digits; for
example, if you enter only a single digit (such as "7") for a channel number, the channel will automatically be
defined as "07".
Enter "07" to utilize this channel. If you press any non-numbered key, the number entered up to that point is
accepted and updated as the new value. Press E
J Series 2.0, 2.4, and 3.0 kW Setup Guide
020-100751-03 Rev. 1 (02-2014)
K
to select it; the cursor will move to the next available character of current text. To convert
EY
A K
.
OWN RROW EY
followed by E
UNC
at any time to cancel changes and return to the previously defined text.
XIT
A K to move the cursor forward or L
IGHT RROW EY
A K
P RROW
UNC
.
NTER
to cancel editing of numerical values.
XIT
Section 3: Operation
and D A
EY OWN RROW
followed by the U
UNC
then the R
UNC
then the L A
EFT RROW
.
NTER
A
EFT RROW
K
to scroll
EY
P
UNC
IGHT
K
.
EY
3-11