KEP MMI-1500 Installation & Operation Manual page 78

7.6.4.3 Opening a Group Library
Click on the Select Lib... button. A Standard Dialog Box for selecting a file appears. Select
the name of the Group library to be opened.
NOTE: New and modified libraries are not saved to disk until the project is
saved. Closing the project without saving loses changed library data and
new libraries!
7.6.4.4 Adding a Group to a Library
1. Open a window and Draw the graphics by using the drawing tools. Also, add any parts such as lamps, function keys, etc.
Example: The group shown below uses Shapes, a Numeric Data part and Rectangles.
2. Use the arrow tool to select all the candidate objects on the window by dragging
around them.
3. Then, in the Library menu, select the Group, Save to library submenu or click on the
tool.
4. Select the appropriate Group library. Then, fill in the Description and Group No. fields.
5. Click OK to save the selected objects to the group library.
Item Description
Used to select the Group library to hold the group.
Group Library
A brief name for the group that is displayed below the cell.
Description
Up to 8 characters are displayed.
The cell where the bitmap graphics are to be imported.
Group No.
Save the group to the specified cell and close the dialog.
OK
Close the dialog without saving the group to the specified
Cancel
cell.
New library with example group in cell 0
70