KEP MMI-1500 Installation & Operation Manual page 259

16.24.4 Device address
Bit/Word Type Address Format
B X dddh
B Y dddh
B R dddh
B L ddd
B T ddd
B C ddd
W SV ddd
W EV ddd
W DT dddd
Note: The PLC's memory range may vary within the range supported by the driver. Use appropriate addresses.
Range
ddd: 0~9999 h: 0~F Inputs Relays, Word portion is decimal, bit portion is
hexadecimal
ddd: 0~9999 h: 0~F Output Relays, Word portion is decimal, bit portion is
hexadecimal
ddd: 0~9999 h: 0~F Internal Relays, Word portion is decimal, bit portion is
hexadecimal
ddd: 0~9999 Link Relays
ddd: 0~9999 Timer Relays
ddd: 0~9999 Counter Relays
ddd: 0~9999 Timer/Counter Presets
ddd: 0~9999 Timer/Counter Accumulators
dddd: 0~9999 Data Registers
251
Notes