Creating The Fast Selection Window - KEP MMI-1500 Installation & Operation Manual

7.5.3 Creating the Fast Selection Window

Every new project starts with a default Fast Selection Window. This window can be deleted and a new Fast Selection
window created to fit your needs. To create a new Fast Selection window first delete the existing Fast Selection window.
Select Window menu, Open Window
Click the New Window.... button, then click Fast Selection.
Fill in the blanks of the Window Setting dialog.
Name: This is always fixed as Fast Selection
Window No. This is always fixed at 4.
Start Pos.: Changes to X and Y have no effect.
The Fast Selection is always positioned at the
bottom of the screen.
Size: Enter the size of the Fast Selection
Window. The Width and Height size are limited.
For 640 x 480 pixel displays range is:
Width: 10 to 200
Height: 10 to 480
For 320 x 240 pixel displays range is:
Width: 10 to 200
Height: 10 to 240
Change of Style has no effect.
Security Level has no effect on Fast Selection
windows. These windows are always
accessible.
Underlay Windows can be assigned as desired.
Set the Frame and Background attributes as desired.
Follow guidelines in the section on "Creating New Windows" to place buttons and parts on the Fast Selection Window.
Note: Any objects that can be placed on a Base window can be placed on the Fast Selection window.
Alternatively, Right click window 4 in the Window
Treebar. Then select Create from the pop up menu.
60