KEP MMI-1500 Installation & Operation Manual page 304

16.45.3.2 Wiring for cable connections using M Series, V Series, VB Series CPUs with RS232 D-Sub 9 Male
Socket ports.
KEP Part#: ZA9M9F (D-Sub 9 Male Socket to D-Sub 9 Female Plug Cable)
HMI PLC[RS-232]
2 TD
3 RD
5 GND
Note: Graphic representation may not reflect the actual appearance of the finished cable.
16.45.4 Device address
Bit/Word Type Address Format
X ooo
B
Y ooo
B
M dddd
B
B T ddd
B C ddd
SM dddd
B
TV ddd
W
CV ddd
W
D dddd
W
W CV2 ddd
W SD dddd
Note: The Controller's memory range may vary within the range supported by the driver. Use appropriate addresses.
Connect to M Series, V Series, VB Series CPU RS-232 port
2 RD
3 TD
5 GND
Shield Earth Ground
Range
ooo: 0~377 (octal)
ooo: 0~377 (octal)
dddd: 0~7999
ddd: 0~255
ddd: 0~255
dddd: 9000~9255
ddd: 0~255
ddd: 0~199
dddd: 0~7999
ddd: 0~255
dddd: 9000~9255
Input Relays
Output Relays
Internal Relays
Timer Relays
Counter Relays
Special Relays
Timer Accumulators
Counter Accumulators
Data Words
Double word Counter Accumulators
Special Data Words
296
Notes