KEP MMI-1500 Installation & Operation Manual page 229

16.8.3.3 Wiring for cable connections using FACON FB-DTBR/DTBR-E with 3 pin Screw Terminal ports.
KEP Part#: (Not Available) (D-Sub 9 Female Socket to Flying Leads Cable)
HMI PLC[RS-485]
1 RXD-
2 RXD+
5 GND
Note: Graphic representation may not reflect the actual appearance of the finished cable.
16.8.4 Device address
Bit/Word Type Address Format
B X
B Y
B M
B S
B T
B C
W R
W D
W RT
W RC
W DRT
W DRC
Note: The PLC's memory range may vary within the range supported by the driver. Use appropriate addresses.
Connect to FACON FB-DTBR/DTBR-E with RS485 Port
1 D-
2 D+
3 GND
Shield Earth Ground
Range
dddd dddd = 0 ~ 9999
dddd dddd = 0 ~ 9999
dddd dddd = 0 ~ 9999
dddd dddd = 0 ~ 9999
dddd dddd = 0 ~ 9999
dddd dddd = 0 ~ 9999
dddd dddd = 0 ~ 9999
dddd dddd = 0 ~ 9999
dddd dddd = 0 ~ 9999
dddd dddd = 0 ~ 9999
dddd dddd = 0 ~ 9999
dddd dddd = 0 ~ 9999
Input coils
Output coils
Internal coils
Step coils
Timer control bit
Counter control bit
Data words
Data words
Single word timer
Single word counter
Double word timer, use double word addresses, i.e.
skip every other address
Double word counter, use double word addresses, i.e.
skip every other address
221
Notes