KEP MMI-1500 Installation & Operation Manual page 274

Wiring for cable connections using Motorola MOSCAD CPU's with RS232 RJ45 clip style ports.
16.30.3.6
KEP Part#: (Not Available) (D-Sub 9 Male Socket to RJ45 Male Plug Cable)
HMI PLC[RS-232]
2 TD
3 RD
5 GND
16.30.3.7 Wiring for cable connections using SIXNET IPM CPU's with RS232 RJ45 clip style ports.
KEP Part#: (Not Available) (D-Sub 9 Male Socket to RJ45 Male Plug Cable)
HMI PLC[RS-232] Connect to SIXNET IPM CPU's with RS-232 Port
2 TD
3 RD
5 GND
16.30.3.8 Wiring for cable connections using TrioMotion MC202, EURO205, MC206, MC216 Controller's
with RS232 Round 8 pin MiniDIN ports.
KEP Part#: (Not Available) (D-Sub 9 Male Socket to 8 pin MiniDIN Male Plug Cable)
HMI PLC[RS-232]
2 TD
3 RD
5 GND
Connect to Motorola MOSCAD CPU's with RS-232 Port
7 RD
8 TD
5 GND
Shield Earth Ground
Conventional Connection
5 RD
6 TD
4 GND
7 RTS 8 CTS
Shield Earth Ground
TrioMotion MC202, EURO205, MC206, MC216 Controller's RS-232 Port
5 RX
3 TX
4 GND
Shield Earth Ground
266