Jog Fs-Window; Window Bar - KEP MMI-1500 Installation & Operation Manual

13.7.8 JOG FS-Window

This function changes the popup window that
appears when the Fast Selection, Task Bar
button is pressed.
Note: The window specified must be the exact same size as the original Fast Selection window (Window 4).
Note: The Fast Selection window does not have to be showing when this button is touched in order for it to change.
Design Tips:
Use this key to change menus when going from operation to setup or help. These function keys can be placed directly on the
Fast Selection window.

13.7.9 Window Bar

A function key defined with "Window Bar"
attribute is used to move the position of a window
on the screen. A Popup, Direct or Indirect window that is smaller than a full screen can make use of this function. The
window with the "window bar" attributes, can be moved by touching the window bar area then touching a second position,
the window is moved to that place. Typically, the Window Bar is placed across the top of the window with a label describing
that window's purpose. The window bar label is displayed on the task bar icon when the window is minimized.
First touch activates the
window move function
Note: The window bar can be used to move windows so they are partially off screen. This might appear to hide the
window. However, a window can never be moved entirely off screen. If the Task Bar is showing, then the window's
icon indicates that it is still open. Toggling off the Base window that called a Popup window closes the Popup window.
Direct and Indirect windows can be recovered by toggling data in their control devices.
Second touch moves the window
to the desired place
138