KEP MMI-1500 Installation & Operation Manual page 233

16.10.3.5 Wiring for cable connections using GE 90 Series VersaMax CPU's with RS232 D-Sub 9 Female
Plug ports.
KEP Part#: (Not Available) (D-Sub 9 Male Socket to D-Sub 9 Male Socket Cable)
HMI PLC[RS-232]
2 TXD
3 RXD
5 GND
16.10.3.6 Wiring for cable connections using GE 90 Series VersaMax CPU001, CPU002, CPU005, CPU E05
Micro CPU's with RS232 RJ-45 socket ports.
KEP Part#: (Not Available) (D-Sub 9 Male Socket to RJ-45 Plug Cable)
HMI PLC[RS-232]
2 TXD
3 RXD
5 GND
Note: Graphic representation may not reflect the actual appearance of the finished cable.
16.10.4 Device address
Bit/Word Type Address Format
B I
B Q
B M
B G
B T
B SA
B SB
B SC
B S
W AI
W AQ
W R
Note: The PLC's memory range may vary within the range supported by the driver. Use appropriate addresses.
Connect to GE 90 Series VersaMax CPU's with RS232 Port
3 RXD
2 TXD
5 GND
Shield Earth Ground
Connect to GE 90 Series VersaMax CPU's with RS232 Port
3 RXD
4 TXD
8 GND
1 RTS 2 CTS
5 DCD 6 DTR
Shield Earth Ground
Range
ddddd ddddd: 1~1000
ddddd ddddd: 1~1000
ddddd ddddd: 1~1000
dddd dddd: 1~7680
ddd ddd: 1~256
dddd dddd: 1~1281
dddd dddd: 1~1281
dddd dddd: 1~1281
dddd dddd: 1~1281
ddddd ddddd: 1~1000
ddddd ddddd: 1~1000
ddddd ddddd: 1~32640
Inputs
Outputs
Coils
Global Coils
Temporary Coils
System Coils
System Coils
System Coils
System Coils
Analog Inputs
Analog Outputs
Internal Registers
225
Notes