KEP MMI-1500 Installation & Operation Manual page 265

16.27.4 Device address
Bit/Word Type Address Format
B X
B Y
B M
B T
B C
B B
B F
W TV
W CV
W D
W W
W R
Note: The PLC's memory range may vary within the range supported by the driver. Use appropriate addresses.
Range
hhhh hhhh: 0~270F
hhhh hhhh: 0~270F
ddddd dddd: 0~9999
ddddd ddddd: 0~255
ddddd ddddd: 0~255
hhhh hhhh: 0~ 270F
ddddd ddddd: 0~65535
ddddd ddd: 0~255
ddddd ddd: 0~255
ddddd dddd: 0~9999
hhhh hhhh: 0~270F
ddddd ddd: 0~65535
Input Relays, Addresses are in hexadecimal
Output Relays, Addresses are in hexadecimal
Auxiliary Relays
Note: Not Available for Generic AnA/AnU CPU Series
Note: Not Available for Generic AnA/AnU CPU Series
Addresses are in hexadecimal.
Note: Not Available for Generic AnA/AnU CPU Series
Note: Not Available for Generic AnA/AnU CPU Series
Timer Accumulator
Counter Accumulator
Data Registers
Addresses are in hexadecimal.
Note: Not Available for Generic AnA/AnU CPU Series
Note: Not Available for Generic AnA/AnU CPU Series
257
Notes