KEP MMI-1500 Installation & Operation Manual page 302

W XW dddd
W YW dddd
W RW dddd
Note: The Controller's memory range may vary within the range supported by the driver. Use appropriate addresses.
Note:
1. According to Toshiba documentation TS02_E003.pdf page 45(NOTE 1): When a Timer/Counter is a time-up/counter, a
data flag bit of 1 is appended to write data; if it is a time-down/counter then 0 is appended. Local bit (LB9050) is defined to
accommodate this option. If LB9050 is ON, Timer/Counters are "Up" types. If LB9050 is OFF, they are treated as "Down"
types.
2. According to Toshiba documentation TS02_E003.pdf page 49(NOTE 1), for the standard T1 version 1.00 and 1.10, the
device bit positions A to F cannot be specified or accessed. For example: R00A cannot be specified as a valid Device
Address. We have verified this bug. It reports a "PLC response" error message to the screen when access is attempted
dd: 0~9999 Input Bits as Words
dd: 0~9999 Output Bits as Words
ddd: 0~9999
294