KEP MMI-1500 Installation & Operation Manual page 278

16.30.3.18 Wiring for cable connections using Motorola MOSCAD CPU's with RS485 RJ45 clip style ports.
KEP Part#: (Not Available) (D-Sub 9 Female Plug to RJ45 Male Plug Cable)
HMI PLC[RS-485]
1 RXD- 3 TXD-
2 RXD+ 4 TXD+
5 GND
Wiring for cable connections using TrioMotion MC204 and MC206 Controller's with RS485
16.30.3.19
Round 8 pin MiniDIN port 2.
KEP Part#: (Not Available) (D-Sub 9 Female Plug to 8 pin MiniDIN Male Plug Cable)
HMI PLC[RS-485]
1 RXD-
2 RXD+
3 TXD-
4 TXD+
5 GND
16.30.3.20 Wiring for cable connections using TrioMotion MC204, MC205 and MC216 Controller's with
RS485 D-Sub 25 Female Plug port.
KEP Part#: (Not Available) (D-Sub 9 Female Plug to D-Sub 25 Male Socket Cable)
HMI PLC[RS-485]
1 RXD-
2 RXD+
3 TXD-
4 TXD+
5 GND
Connect to Motorola MOSCAD CPU's with RS-485 Port
3 DO+/RI+
2 DO-/RI-
1 GND
Shield Earth Ground
TrioMotion MC204 and MC206 Controller's RS-485 Port
7 TXD-
8 TXD+
2 RXD-
1 RXD+
4 GND
Shield Earth Ground
Connect to TrioMotion MC204 (Port 1), MC205 (Port 2) and MC216 (Port2) with
RS485.
8 TXD-
9 TXD+
7 RXD-
6 RXD+
5 GND
Shield Earth Ground
270