KEP MMI-1500 Installation & Operation Manual page 161

Note: How to edit point location
Go to the Profile tab:
The Profile tab settings are used to numerically set the
following:
Position: The location of the upper left-hand corner of
the Animation area.
Size: The dimensional area on the screen that the
outside edge of the path occupies.
Shape Rect. Size: The area of the shape or bitmap that
is used in the Animation.
Points can be repositioned by selecting the point
number for the location and adjusting the X and Y
coordinates.
Moving Shape Design Tip: Use the Animation tool along with a pointing shape/bitmap to guide a user through multiple
touch operations. After every touch, increment the word after the Read address.
Note: Remember, incrementing the Read address changes the state, not the position.
153