KEP MMI-1500 Installation & Operation Manual page 301

16.44.3.3 Wiring for cable connections using Toshiba T Series CPU's with RS422 D-Sub 15 Female Plug Link
ports.
KEP Part#: (Not Available) (D-Sub 9 Female Plug to D-Sub 15 Male Socket Cable)
HMI PLC[RS-485]
1 RXD-
2 RXD+
3 TXD-
4 TXD+
5 GND
16.44.3.3 Wiring for cable connections using Toshiba S2T Series CPU's with RS485 Screw Terminal Link
ports.
KEP Part#: (Not Available) (D-Sub 9 Female Plug to flying leads Cable)
HMI PLC[RS-485]
1 RXD-
2 RXD+
3 TXD-
4 TXD+
5 GND
Note: Graphic representation may not reflect the actual appearance of the finished cable.
16.44.4 Device address
Bit/Word Type Address Format
B X ddddh
B Y ddddh
B R ddddh
B S ddddh
W T dddd
W C dddd
W D ddddd
W SW dddd
Connect to Toshiba T Series CPU's with RS422 Port
11 TXA
3 TXB
10 RXA
2 RXB
7 SG
5 RTSA 4 CTSA
13 RTSB 12 CTSB
Shield Earth Ground
Connect to Toshiba S2T Series CPU's with RS422 Port
2 TXB
1 TXA
5 RXB
3 RXA
6 SG
Shield Earth Ground
Range
ddd: 0~9999 h: 0~F
ddd: 0~9999 h: 0~F
ddd: 0~9999 h: 0~F
ddd: 0~9999 h: 0~F
ddd: 0~9999
ddd: 0~9999
dddd: 0~9999
ddd: 0~9999
Input Relays, Word portion is decimal, bit portion is
hexadecimal
Output Relays, Word portion is decimal, bit portion is
hexadecimal
Internal Relays, Word portion is decimal, bit portion is
hexadecimal
Special Relays, Word portion is decimal, bit portion is
hexadecimal
Timer Registers
Counter Registers
Data Registers
Special Bits as Words
293
Notes