KEP MMI-1500 Installation & Operation Manual page 107

LB Address Description
9014 Task bar CPU Indicator pressed bit, it is:
Set ON when CPU Indicator is pressed
Task bar Alarm Indicator pressed bit, it is:
9015
Set ON when Alarm Indicator is pressed
9016 Print Error indicator:
Changes to 1 when printing fails
9017 Printer enable bit. The user:
Sets ON to disable print functions.
Sets OFF to enable print functions.
9020 Pen enable bit. The user:
Sets ON to enable pen functions.
9021 Brush (Eraser) enable bit. The user:
Sets ON to enable brush functions.
9022 Clipping enable bit. The user:
Sets ON to enable clip functions.
Pen width to 1 pixel enable bit. The user:
9030
Sets ON to set pen width to 1 pixel.
9031 Pen width to 2 pixels enable bit. The user:
Sets ON to set pen width to 2 pixels.
9032 Pen width to 3 pixels enable bit. The user:
Sets ON to set pen width to 3 pixels.
9040 Fast Selection window enable bit. The user:
Sets ON to hide Fast Selection window.
Sets OFF to show (pop-up) Fast Selection
window.
9041 Task Bar enable bit. The user:
Sets ON to hide the Task Bar.
Sets OFF to show (pop-up) the Task Bar.
9042 Task Buttons enable bit. The user:
Sets ON to hide the two Task Buttons.
Sets OFF to show (pop-up) the two Task
Buttons.
9043 Hide/Show Task Items (Fast Selection screen, Task
Bar and Task Buttons) The user:
Sets ON to hide the Task Items.
Sets OFF to show (pop-up) the Task Items.
9044 Enable changes made to System Parameters in
Retentive memory area. The user:
Sets ON to make the Security Passwords,
Backlight and Buzzer System Parameters
active.
OFF has no effect.
9045 Reset MMI. The user:
Sets ON to reset the HMI.
9046 Security level change event indicator.
NOTE
This bit does not return the state of the
"CPU indicator". (read/write)
This bit does not return the state of the
"alarm indicator". (read/write)
Use to trigger an alarm or event to let
the user know there is a problem with
printing. (read only)
Setting in System Parameters must
have a printer selected for this Bit to
have an effect. (read/write)
Positive edge trigger. Message board
use (read/write)
Positive edge trigger. Message board
use (read/write)
Positive edge trigger. Message board
use (read/write)
Positive edge trigger. Message board
use (read/write)
Positive edge trigger. Message board
use (read/write)
Positive edge trigger. Message board
use (read/write)
This bit overrides the System
Parameter Task Bar setting.
(read/write)
Task Bar control (read/write)
Task Bar control (read/write)
When enabled, all items appear in their
activated state. Task Bar and Fast
Selection window are opened.
(read/write)
Forcing this bit ON restores Security
Passwords, Backlight and Buzzer
system parameters from Reserved
Retentive word area.
After restoration, the system sets this
bit OFF. (read/write)
Forcing this bit ON resets the MMI.
(write)
Changes to 1 when going from a lower
security level to a higher security level.
(read only)
99
Version
Ver 1.4
Ver 1.4
Ver 1.4
Ver 1.4
Ver 1.4
Ver 1.4
Ver 1.4
Ver 1.4
Ver 1.4
Ver 1.4
Ver 1.4
Ver 1.4
Ver 1.4
Ver 1.4
Ver 2.1
Ver 2.1
Ver 2.1