KEP MMI-1500 Installation & Operation Manual page 273

16.30.3.3 Wiring for cable connections using Entertron or Giddings & Lewis PiC9, PiC90, PiC900 CPU's
with screw terminal ports.
KEP Part#: (Not Available) (D-Sub 9 Male Socket to Flying Leads Cable)
HMI PLC[RS-232]
2 TD
3 RD
5 GND
Wiring for cable connections using Industrial Control Links ICL Series, SIXNET SIXTRAK
16.30.3.4
Gateway and VersaTrak RTU Controllers Compatible CPU's with RS-232 D-Sub 9 pin ports.
KEP Part#: (Not Available) (D-Sub 9 Male Socket to D-Sub 9 Male Socket Cable)
HMI PLC[RS-232]
2 TD
3 RD
5 GND
16.30.3.5 Wiring for cable connections using International Parallel Machines CPU's with RS-232 D-Sub 9
Male Socket ports.
KEP Part#: (Not Available) (D-Sub 9 Male Socket to D-Sub 9 Female Plug Cable)
HMI PLC[RS-232]
2 TD
3 RD
5 GND
Connect to Entertron or Giddings & Lewis CPU with RS232 Port
1 RD
2 TD
3 GND
Shield Earth Ground
MODBUS COMPATIBLE CPU RS-232 port
3 RD
2 TD
5 GND
4 DTR 6 DSR
7 RTS 8 CTS
Shield Earth Ground
Connect to International Parallel Machines CPU with RS232 Port
1 RD
2 TD
3 GND
7 RTS 8 CTS
Shield Earth Ground
265