Table of Contents
Advertisement
Set Style
Parameters
Step down Low limit
High limit
Break time
Set at
Set value
window
maximized
Set at
Set value
window
minimized
Set at
Set value
backlight
off
Design Tip: Use the following to provide error codes to the
PLC after data entry.
Set at
Set value
enter
success
Set at
Set value
enter fail
Description
This Attribute becomes active
automatically when the window is
active. The Value is decremented
at regular intervals as specified by
the Break time until the Low limit
is reached. Then the Value is
reset to the High limit. This cycle
is repeated until the window
becomes inactive.
Set value data is written to the
designated word automatically
when the window containing it is
maximized.
Set value data is written to the
designated word automatically
when the window containing it is
minimized.
Set value data is written to the
designated word automatically
when the backlight is turned off.
When a function key with the
ENT attribute is pressed in
response to a Numeric Input or
ASCII Input part and the attempt
to write the data succeeds, the
designated Device Address is
loaded with the Set value.
When a function key with the
ENT attribute is pressed in
response to a Numeric Input or
ASCII Input part and the attempt
to write the data fails, the
designated Device Address is
loaded with the Set value.
130
Hide quick links:
Advertisement
Chapters
Table of Contents
