KEP MMI-1500 Installation & Operation Manual page 136

Note: Set Style Attributes
Set Style Parameters
Set Set value
constant
Design Tip: Use the JOG attributes to create Thumbwheels,
Adjust +/-, and Spin controls.
Add value Inc. value
(JOG+) Upper limit
Maximum:
32767
Sub value Dec. value
(JOG-) Bottom limit
Minimum:
-32768
JOG++ Inc. value
Upper limit
JOG delay
JOG speed
Maximum:
32767
JOG- - Dec. value
Bottom limit
JOG delay
JOG speed
Minimum:
-32768
*JOG Delay: The interval that the part must be touched before repeat action occurs.
*JOG Speed: The interval between repeat actions once repeating begins.
Note: Interval times in actual operation may vary from specified. Do not use HMI intervals for critical timing.
Set Style Parameters
Set at Set value
window
open
Set at Set value
window
close
Description
When pressed, preset Set value
data is written to the designated
word.
Design Tip: Use to put fixed data
into words. Examples: force default
values; return to home positions;
Every time pressed, the Inc. value
is added to the designated word, if
the result is not larger than Upper
limit.
Every time pressed, the Dec.
Value is subtracted from the value
of the designated word, if the result
is not less than Bottom Limit.
When pressed, the Inc. value is
added to the designated word at
regular intervals as specified by
JOG delay* and JOG speed*, if
the result is not larger than Upper
limit.
When pressed, the Dec. value is
subtracted from the value of the
designated word at regular
intervals as specified by JOG
delay* and JOG speed*, if the
result is not less than Bottom
limit.
Description
When the window containing this
part is opened, the Set value data
is written to the designated word.
Design Tip: Use this attribute to
send the window number to the
PLC so it knows what window is
open.
Set value data is written to the
designated word automatically
when the window containing it is
closed.
Design Tip: Use this attribute to
force the password state to 0 when
a secure window is closed.
128