1.1.7 Upper Cover
[B]
1. Remove the platen cover or DF.
2. Remove the left side scale (2 screws).
3. Remove the exposure glass. (See Exposure Glass Removal.)
4. Remove the upper rear cover (2 screws).
5. Remove the upper cover [A] with the operation panel [B] (9 screws and 2
connectors).
6. Remove the operation panel from the upper cover as shown. (1 screw
and 2 hooks).
NOTE: When reinstalling the operation panel, make sure to do the
following:
1. Pass the operation panel harness [C] through the hole and
connect the 2 connectors before reinstalling the operation
panel.
2. Insert the rear side of the operation panel into the upper
cover, and then push in the front side.
SM
[C]
5-3
[A]
A151/A152