[B]
[E]
[D]
7. Reinstall the TC/SC corona unit [A].
NOTE: a) When reinstalling the TC/SC corona unit, first set the right
positioning tabs [B] of the TC/SC corona unit into the right
holders [C] in the transport unit, then set the left positioning
tabs [D] into the left holders [E] by pulling the TC/SC corona
unit towards the registration roller side.
b) Make sure that the four positioning tabs of the TC/SC corona
unit fit into the holders in the transport unit as shown.
c) Make sure that six springs [F] are correctly positioned
underneath the TC/SC corona unit as shown.
A151/A152
[C]
5-50
[A]
[F]
FSM