Ricoh A151 Field Service Manual page 74

Mode No.
91 Optics Cooling
Fan Operation
(FT3013 copier
only)
93 Maximum Copy
Quantity
95 V Correction
L
Reset
98 Clear Counters
99 Clear All
Memory
100 By-pass Feed
Copies
101 Paper Tray
Copies
102 Open
103 Total Copies
106 DF Originals
(FT3213 copier
only)
110 Misfeeds (total) Displays the total number of paper misfeeds.
111 Number of
Misfeeds by
Location
120 Total Service
Calls
121 Optics Section
Service Calls
122 Exposure Lamp
Service Calls
123 Open
A151/A152
Function
Enables the optics cooling fan (service option)
operation as FT3213 copier.
Refer to Section 6 for information.
Limits the maximum copy quantity that can be
entered.
Resets the exposure lamp data and counter for
the V correction.
L
Before performing this mode, clean the optics
parts. After performing this mode, perform SP48
and SP56.
Clear the following counters:
• Copy Counters
• SC Counters
• Misfeed Counters
• PM Counter
To clear, turn on DPS101-2 and short-circuit
JPS101-C (Lower).
Clear all counters and returns all modes to the
default setting.
To clear, turn on DPS101-2 and short-circuit
JPS101-C (Lower).
Displays the total number of copies fed from the
by-pass feed table.
Refer to NOTE 5.
Displays the total number of copies fed from the
paper tray.
Refer to NOTE 5.
No function.
Displays the total number of copies.
Refer to NOTE 5.
Displays the total number of originals fed from
the DF.
Refer to NOTE 5.
Refer to NOTE 5.
Displays the total number of paper misfeeds in
each area. Press the "1" key to select the
desired number.
Refer to NOTE 5. "1" will be selected when the
Auto Image Density key is pressed.
1: Paper Feed
2: Exit
3: (Open)
4: DF
Displays the total number of times the service
call indicator has turned on.
Displays the total number of "optics section"
service calls.
Displays the total number of "exposure lamp"
service calls.
No function.
4-18
Data
0: No
1: Yes
1–99
0: No
1: Yes
0: No
1: Yes
0: No
1: Yes
FSM