CUSTOMER SERVICE GROUP
BULLETIN NUMBER:
APPLICABLE MODEL: FT3013/3213
SUBJECT: PARTS CATALOG UPDATES
GENERAL:
The following Parts Updates are being issued for all FT3013/3213 Parts Catalogs. This information sh ould
be incorporated into all existing FT3013/3213 Parts Catalog documentation.
• •
UPDATE NO. 1 -
PART NUMBER
A1521738
* DENOTES NEW ITEM
UNITS AFFECTED:
Not available at time of publication.
• •
UPDATE NO. 2 -
PART NUMBER
A1525036
INTERCHANGEABILITY CHART:
OLD and NEW parts can be used in both OLD and
0
NEW machines.
NEW parts can be used in OLD and NEW machines.
1
OLD parts CAN NOT be used in NEW machines.
Must be installed as a set on units manufactured prior to the S/N cut-in. On units manufactured aft er the S/N cut-in or
3/S
previously modified, use the new part numbers individually.
TECHNICAL SERVICE BULLETIN
3013/3213 - 006
CUSHION - To reduce noise,
cushions have been added to
the Scanner Drive Motor
Bracket as shown.
DESCRIPTION
Cushion - 3.5mm
PARTS CATALOG CORRECTION - Please remove the following part from the
Parts Catalog. If you need to replace this item, please order the DC Harness
(A1525360).
DESCRIPTION
Operation Panel Harness
QTY.
0
3
QTY
1
0
NEW parts CAN NOT be used in OLD machines.
2
OLD parts can be used in OLD and NEW machines.
OLD parts CAN NOT be used in NEW machines.
3
NEW parts CAN NOT be used in OLD machines.
10/26/95
Scanner Drive
Motor Bracket
Cushion - 3.5mm
REFERENCE
PAGE
ITEM
11
34 *
REFERENCE
PAGE
ITEM
45
22