2.10 4TH/5TH MIRROR MOTOR REPLACEMENT
(FT3213 Copier Only)
[C]
1. Turn off the main switch.
2. Remove the following parts.
•
Platen cover or DF
•
Exposure glass
•
Upper rear cover
•
Lens cover
•
Upper cover
•
Right cover
3. Move the 4th/5th mirror assembly [A] to the left (viewed from the front).
4. Remove the motor bracket [B] (2 screws)
5. Free the copier main board [C] (3 locking supports).
6. Disconnect the motor 6P connector [D] located between the main board
and the copier frame.
7. Separate the 4th/5th mirror motor [E] from the bracket (2 screws) and
replace it.
A151/A152
[D]
[A]
5-24
[B]
[D]
[E]
[B]
SM