REPLACEMENT AND ADJUSTMENT
18. REPLACEMENT AND ADJUSTMENT
18.1 TONER SUPPLY MOTOR REPLACEMENT
1. Turn off the main switch.
2. Remove the upper rear cover and main control board (all connectors and
4 locking supports).
3. Remove the toner supply motor bracket [A] (3 screws).
4. Remove toner supply motor gear shaft assy. [D] (2 e-clips).
5. Remove the motor [B] from the bracket (2 screws).
A202/A203
[B]
8-52
Rev. 5/30/97
[D]
[A]
A203R500.wmf
SM