Ricoh A151 Field Service Manual page 354

REPLACEMENT AND ADJUSTMENT
9.2 FEED-IN UNIT REMOVAL
[A]
1. Turn off the main switch.
2. Remove the transport belt assembly. (See Transport Belt Replacement.)
3. Remove the left hinge bracket [A] (4 screws and 1 connector).
4. Disconnect five connectors from the main board [B] (CN111, CN113,
CN115, CN116 and CN117).
5. Remove the feed-in unit [C] (5 screws).
NOTE: When reinstalling the feed-in unit, the harness must be
positioned underneath the right hinge bracket.
A202/A203
[B]
9-16
[C]
A662R503.img
SM