[H]
3. Open the platen cover [A] and remove the lock pins [B].
(A202 copier: 2 pins, A203 copier: 4 pins)
NOTE: Save the lock pins for future shipping use.
4. Open the front cover [C], and remove the foam block [D].
5. Remove the shipping retainer [E], tape and seal [F].
NOTE: Save the shipping retainer for future shipping use.
6. Open the upper unit [G] by pressing the release lever [H]. Gently remove
the shipping spacers [I] from the transfer/separation corona unit [J].
Remove the strip of tape [K] and close the upper unit.
CAUTION
Be sure to place and hold your left hand on top of the upper unit while
pushing the release lever to the right with your right hand. The upper
unit will raise with force, and holding the upper unit will prevent it
from lifting too rapidly.
SM
[B]
[A]
[F]
[C]
A203I502.img
[G]
[I]
[K]
A203I504.img
8-23
INSTALLATION
[E]
[D]
[J]
A202/A203
[F]
A203I503.img