Feed Roller Replacement - Ricoh A151 Field Service Manual

5.4 FEED ROLLER REPLACEMENT

[F]
1. Turn off the main switch.
2. Remove the feed-in unit. (See Feed-in Unit Removal.)
3. Remove the feed roller timing belt [A], feed roller gear [B] (1 E-ring and 1
spring pin [C]) and 1 bushing [D].
NOTE: Be careful not to lose the spring pin.
4. Slide the feed roller shaft [E] towards the front and remove the feed
clutch [F] (1 E-ring and 1 connector).
5. Take out the feed roller shaft (1 spacer and 1 bushing ----- from the rear
side).
6. Remove the feed roller [G] from the shaft (3 idler rollers [H], 7 E-rings
and 1 spring pin [I]).
NOTE: Be careful not to lose the spring pin.
A151/A152
[H]
[G]
7-12
[E]
[I]
[A]
[D]
[B]
[C]
FSM