Upper And Lower Card Reader Cover Removal; Card Reader Cable Removal - Ricoh LI-MF1 M126 Field Service Manual

6. Remove the LED light tube (B) from the upper card reader cover.
7. Pull the two tabs (C) back and remove the card from the card reader housing.
• When replacing the light tube, cover the tube with a small piece of black electrical tape if possible.

Upper and Lower Card Reader Cover Removal

1. Scanner front cover (
2. Card reader ( p.42 "Card Reader Removal").
3. Remove the four screws (A) fastening the upper and lower card reader covers.

Card Reader Cable Removal

1. Scanner front cover (
2. Operator panel keypad assembly (
3. Release the tabs on the rear of the operator panel display and tilt it upright.
p.65 "Scanner Front Cover Removal")
p.65 "Scanner Front Cover Removal"l)
p.90 "Operator Panel Keypad Removal"l)
Removal Procedures
4
43