Ricoh A151 Field Service Manual page 322

SERVICE PROGRAM MODE
Mode No.
By-pass Feed
100 Copies
Paper Tray
101
Copies
102 Open
Total Copies
103
DF Originals
106 (A203 copier
only)
Misfeeds (total)
110
Total Service
111
Calls
NOTE 1: 1) After the following SP mode numbers are entered, the copier
goes automatically into copy mode when the Auto Image
key is pressed:
SP mode numbers: 5, 6, 7, 52, 56, 59, and 65
2) After the following SP mode numbers are entered and the
key is pressed, select the desired input numbers or SP mode
settings and press the
SP mode numbers: 8, 37, 41, 42, 43, 44, 45, 47, 48, and 50
NOTE 2: The A202 copier displays the SP mode setting in the Copy
Counter. Since the Copy Counter has only 2 digits, the first digit is
displayed in the Manual Image Density indicator when the setting
exceeds "99".
A202/A203
Displays the total number of copies fed from the
by-pass feed table.
Refer to NOTE 4.
Displays the total number of copies fed from the
paper tray.
Refer to NOTE 4.
No function.
Displays the total number of copies.
Refer to NOTE 4.
Displays the total number of originals fed from
the DF.
Refer to NOTE 4.
Displays the total number of paper misfeeds.
Refer to NOTE 4.
Displays the total number of times the service
call indicator has turned on.

: "1"
A203M500-2.wmf
Function
key.
8-44
Rev. 5/30/97
Settings


SM