Ricoh A151 Field Service Manual page 374

CUSTOMER SERVICE GROUP
BULLETIN NUMBER:
APPLICABLE MODEL: FT3013/3213
SUBJECT: PARTS CATALOG UPDATES
GENERAL:
The following modifications have been made to comply with the Energy Star requirements discussed in
Publications Bulletin #PUB-066. This information should be incorporated into all existing Parts Cata log
documentation.
1. MAIN SWITCH - The Main Switch has been changed to a rocker type switch. This type of switch will
automatically shut "OFF" power to the copier if the machine has not been used for a certain period o f
time.
2. MAIN BOARD, etc... - A control circuit and a 2P connector have been added to the main board.
A Harness Main Switch (described above) has been added.
Two wires have been added to the AC Harness.
Copier Main Board
AC Harness
INTERCHANGEABILITY CHART:
OLD and NEW parts can be used in both OLD and
0
NEW machines.
NEW parts can be used in OLD and NEW machines.
1
OLD parts CAN NOT be used in NEW machines.
Must be installed as a set on units manufactured prior to the S/N cut-in. On units manufactured aft er the S/N cut-in or
3/S
previously modified, use the new part numbers individually.
TECHNICAL SERVICE BULLETIN
3013/3213 - 009
Old
Harness Main Switch
New
New Style Power Switch
NEW parts CAN NOT be used in OLD machines.
2
OLD parts can be used in OLD and NEW machines.
OLD parts CAN NOT be used in NEW machines.
3
NEW parts CAN NOT be used in OLD machines.
1/26/96
Continued...