Ricoh A151 Field Service Manual page 316

SERVICE PROGRAM MODE
15.4 SERVICE PROGRAM MODE TABLE
1. Items marked with an

2. A "†" after the mode name signifies that copies can be made while in the
SP mode. (Copies can be made by pressing the
the key.)
3. In the Function column, comments (extra information) are in italics.
4. In the Settings column, the default value is printed in bold letters.
5. For some SP modes, display of the settings is different between the A202
and A203 models because of the difference in the operation panel. After
entering the desired SP mode number, refer to the notes written at the
end of the table to correctly observe the displayed setting. (Which note to
refer is described inside the Function column.)
Mode No.
Free Run with
Exposure Lamp
OFF †
5
Misfeed
Detection Off †
6
7 Aging Mode
Input Check †
8
Output Check
9
All Indicators ON Turns on all the indicators on the operation panel.
11
Auto Reset
Time Setting
14 (Energy Star)
A202/A203


are different from the A151 and A152 copiers.
Function


Turn on DPS101-1, then press the
start the free run. Press the
free run. Press the
turn off this mode.
Use this mode for the scanner movement check.
To save toner, remove the development unit.
Refer to NOTE 1



Copies are made without misfeed detection.
Press the key to make a copy. Press the
key in Ready mode to turn off this mode.
Use this mode to check whether a paper misfeed
was caused by a sensor malfunction.
The total counter increments when copies are
made in this mode. Refer to NOTE 1
Factory use.
Displays the inputs from sensors and switches.
Refer to NOTE 1
Turns on electrical components.
To turn off the indicators, press the
Select the auto shut off time.
The copier main switch is shut off automatically
after the selected auto shut off time, if SP77 is at
"0".
8-38


key after pressing


key to
key to stop the
key in Ready mode to


key.
Rev. 7/97
Settings
For details, see
page 46.
For details, see
page 47.
0: 30 min.
1: 15 min.
2: 60 min.
3: 90 min.
4: 120 min.
SM