Ricoh A151 Field Service Manual page 308

INSTALLATION
[C]
[F]
[G]
[H]
5. Insert the DF [A] into the slots [B] in the copier upper cover.
6. Secure the DF to the copier (2 thumb screws [C]).
7. Remove the upper rear cover [D] (2 screws).
8. Remove the ADF bracket [E] (1 screw and 1 clamp).
9. Remove the interface harness [F] (3 screws) and the interface board with
2 locking supports [G] from the A219 interface unit bracket [H].
10. Attach the interface board and the interface harness to the A203 interface
unit bracket [I] (3 screws).
A202/A203
[A]
[B]
A662I506.img
[D]
[I]
A662I513.wmf
8-30
[E]
A662I507.img
SM