Replacement And Adjustment - Ricoh A151 Field Service Manual

5. REPLACEMENT AND ADJUSTMENT

5.1 TRANSPORT BELT REPLACEMENT
[A]
[D]
1. Turn off the main switch.
2. Remove the original table [A].
3. Remove the DF [B] from the copier (2 knob screws, 1 power supply cord
and 1 optics harness).
4. Remove the grip guide [C] (2 screws).
5. Remove the transformer cover [D] (3 screws), DF motor cover [E]
(4 screws) and main board cover [F] (2 screws).
6. Remove the transport belt assembly [G] (5 screws and 1 drive belt [H]).
NOTE: When installing the transport belt assembly, make sure that the
positioning pin [I] fits into the DF frame.
A151/A152
[B]
[E]
[F]
[H]
7-8
[I]
[G]
[C]
FSM