Ricoh A151 Field Service Manual page 371

CUSTOMER SERVICE GROUP
BULLETIN NUMBER:
APPLICABLE MODEL: FT3013/3213
SUBJECT: ENERGY STAR MODIFICATION (DETAILS)
GENERAL:
To conserve energy, the copier automatically turns "OFF" 30 minutes after the last copy job has been
completed. The details of the machine operation are as follows:
• •
AUTO OFF MODE
NOTE: For part numbers, refer to Tech Service Bulletin No. 3013/3213-009
• •
SP MODE
Mode No.
SP14
SP9-7
The Auto Off time can also be selected by the customer. Refer to page 2 of this bulletin for the pr ocedure.
• •
INSTRUCTION SHEET An additional explanation sheet has been added to the operating instructions.
TECHNICAL SERVICE BULLETIN
3013/3213 - 008
To automatically turn "OFF" the copier, a new type of Main Switch with an
incorporated coil is used. When the CPU drops CN126-1 from +24V to 0, the
Main Switch contact is opened. The Point-to-Point wiring diagram and connector
layout are shown below.
Point-to-Point Diagram
The following SP modes have been added to the Field Service Manual. Replace
page 4-13 and 4-22 of the Field Service Manual with the updated pages provided
with this package.
Function
Auto off time can be selected
Output Check for the Main Switch
(the machine will turn "OFF")
Please make copies of the following pages and add them to the operating
instructions that were shipped with the copier.
Main Control Board
DC Harness
Main Switch Harness
0 : 30 minutes (default)
1 : 15 minutes
2 : 1 hour
3 : 1.5 hours
4 : 2 hours
1/26/96
Main Switch
Settings
Continued...